De’Longhi · Descale message
De’Longhi Dinamica descaling: choose the correct ECAM35X interface
Dinamica has three interface branches and Dinamica Plus is separate. Screen models confirm with OK; icon-only panels follow a different button sequence.
Before you start
- ✓Confirm the full ECAM35X reference and interface.
- ✓Remove the filter when the exact instructions request it.
- ✓Empty both drip tray and grounds container together.
01
Checks to run in order
Dinamica · ECAM35x
- 01
Open the matching support branch
Use the ECAM35X.55/75 display guide, ECAM35X25 icon guide or ECAMX.15/35 guide. For screen models, select the descale message and confirm with OK.
✓ After this stepThe guide reproduces your screen or icon panel. - 02
Complete the guided chemical phase
Prepare the solution and container specified in the exact manual, then follow each on-screen or light prompt without interrupting the cycle.
✓ After this stepThe machine reaches the rinse request. - 03
Fill to MAX for rinsing
Rinse the tank, fill to MAX and continue. If a third rinse is requested, fill to MAX again; De’Longhi identifies this as normal when the previous volume was insufficient.
✓ After this stepThe machine clears the descale request after rinsing.
03
Manufacturer instructions used
Official manufacturer source
Official manufacturer sourceDe’Longhi — Dinamica ECAM35X.55/75 help centreApplies to · ECAM35X.55 and ECAM35X.75 display models↗Official manufacturer sourceDe’Longhi — Dinamica ECAM35X25 help centreApplies to · ECAM35X25 icon interface↗Official manufacturer sourceDe’Longhi — Dinamica ECAMX.15/35 help centreApplies to · ECAMX.15 and ECAM35X.35↗
FAQ · De’Longhi Dinamica
Is Dinamica Plus covered here?
No. Dinamica Plus has a different interface and must follow its exact manual.